BRADY PowerMark USB Printer 드라이버 다운로드 무료

PowerMark USB Printer Driver 9/­28/­06 0.­02 MB,­ ZIP The electronic file of the Brady PowerMark USB Device Driver is available for download in ZIP format.­ PowerMark USB Print Driver Installation Step 1.­ Unzip the contents of the "PowerMark_­USB_­Driver_­.­zip" file to a location that can be easily accessed in later steps Step 2.­ Power down the computer and printer Step 3.­ Connect USB cable (E200534) to the computer and printer Step 4.­ Power up Printer first and put unit into on-line mode Step 5.­ Power up computer and upon start up,­ a found new hardware message should appear.­ Click next and follow the dialog boxes: Select Search for suitable driver for my device then click next Select floppy disk drive and click next **Note: if the USB driver has been downloaded onto the hard drive or network drive select the specify a location option The system should find device driver mcf572_­pm3.­inf; click next Select finish to complete the USB driver installation Step 6.­ Install PowerMark print driver by inserting Printer Driver CD and run setup.­exe Select Install Brady print driver and click start Select PoweMark for the model of printer and click OK When installing on the USB port select no to the automatic port setup **Note: If this was being setup to the serial connection than the option yes would be selected.­ Select USB printer port and click OK Select Yes,­ I want to restart my computer now and click finish Installation is complete